PT-5RPK Milled Telescopic Skeleton-Type Stock with a rubber back and adjustable cheek pad is designed for installation on RPK with a standard fixed stock.

PT-5RPK allows adjustments based on operational needs and the individual physique of the user.

Operational Benefits:

• No modification is required for installation
• Adjustable cheek and adjustable butt pad
• Wide range of length adjustments (up to 10 cm / 3.9 inches)
• Folding mechanism allows fixation along the receiver, maintaining length, cheek height, and butt pad adjustments
• Iron sight can be used when the cheek is in the lower position
• Two rubber cover options for the back of the stock: wide and narrow
• Slingmount included

Specifications:

Material: D16T alloy coated in black

Weight: 595 ± 10 g (in kit with wide butt pad)

Overall dimensions: (261/361 x 121/142 x 49) mm

Operating temperature range: from -50 °С to +50 °С

Warranty period: 60 months

In the Kit:

Installation Instructions:

1. Unscrew the fixing screws of the current stock and remove it (use a hammer if necessary).
2. Insert the PT-5RPK stock into the RPK (use a spacer for hammering) and tighten the mounting screws.
3. To fold, press the button on the bottom and fold until locked.
4. To unfold, press the button on the top and unfold until locked.
5. To adjust length, raise the locking lever, press the button, set the desired length, and lower the lever to secure.
6. To set cheek height:
• Loosen the screws, set the cheek to the desired height, and tighten screws to lock.
7. To adjust recoil pad height:
• Loosen the screw, set the pad height, and tighten to secure.
8. Install the necessary rubber pad on the back of the stock.

Note: Moving parts of the telescopic stock mechanism should be cleaned during maintenance.

More detailed illustrated instructions are in the instruction manual.